"Still In Doubt Contact Us."
Tile adhesive is a polymer-modified, ready-to-use bonding material designed for fixing tiles on floors and walls. It offers superior adhesion strength, flexibility, and long-term durability compared to conventional cement-sand mortar. The composition typically includes Adhesives comprise reactive polymers, solvent or water carriers, mineral fillers, tackifiers for initial grip, plasticizers for flexibility, and additives for durability, UV resistance, and microbial protection.
. Choosing the right adhesive depends on three key factors:
Polymer-Modified Type-2 Adhesive.
Polymer-Modified Type-3 Adhesive.
Substrate must be clean, dry, free of loose particles or grease.
Absolutely for exteriors and facades to accommodate thermal movements; neglect can cause cracking.
Most bagged adhesives keep potency for ~12 months if sealed and stored dry.
Yes, with compatible adhesive like Type-2 for internal floor only, but ensure surface is clean and hatched.
Tile grout is a specially formulated material used to fill the gaps (joints) between installe tiles. It helps prevent water seepage, accommodates slight expansion or contraction, and enhances the overall strength and appearance of the tiled surface.
Cement Grout is a traditional grout made from a mixture of cement, sand, and water. It is suitable for general applications with low to moderate foot traffic and minimal thermal variation.
Epoxy Grout is made from epoxy resins and a hardener, making it highly resistant to stains, chemicals, and water. It is ideal for areas with high foot traffic, frequent cleaning, and significant temperature variation, such as kitchens, bathrooms, and commercial spaces
Grouting should be done 24 hours after tile installation, once the adhesive is fully cured.
Yes, especially in wet areas like bathrooms, balconies, and terraces. Waterproofing protects against water damage and increases tile life.
Yes, on dusty or smooth surfaces, applying primer ensures better bonding.
Yes, with proper surface treatment and flexible adhesives like- PU ADHESIVE.
Traditional cement slurry is slow to set, creates a messy application, requires water curing, and lacks the bonding strength needed for large or heavy tiles. Modern tile adhesives provide faster setting, better precision, and superior holding capacity without the need for curing.
No, the surface must be dry before application. Moisture can compromise the bonding strength and curing process of the adhesive.
Not always. While some adhesives are suitable for both indoor and outdoor use, outdoor areas require adhesives that can withstand weather changes, moisture, heat, and movement.
Use tile and grout cleaners like: -Tile create (TC) grout, Roff Cera Clean or LATICRETE Heavy-Duty Cleaner. Avoid acid on sensitive surfaces.
Yes, sealing grout increases its resistance to stains and water, especially for cementitious grouts.
No, never add water or re-temper adhesive once it has started to set. This weakens the bonding strength. Always mix fresh adhesive in small, manageable batches.
Yes, most are non-toxic and VOC-compliant. Use appropriate PPE (Personal Protection Equipment) during application.
Yes, with heat-resistant adhesives. Always check technical data sheets for temperature resistance.
Most deliveries are completed within 4 hours, depending on your location and product availability.
You can contact our support team via call or WhatsApp. In some areas, our technical team can also visit the site.
We stand by our craftsmanship with a solid guarantee for your satisfaction. Every project is built with high-quality materials and precision. We don’t just finish a project and leave—we provide dedicated after-service support for lasting quality.
We proudly serve homeowners and businesses in multiple locations, delivering high-quality custom carpentry solutions with precision and craftsmanship.
